PM115 Water Methanol Injection Pump (30 GPH/1890CC PER MINUTE @ 190 PSI)

• Pressure adjustable from 100-300 PSI
• 3/8 NPT female inlet & outlet port
• Motor turns 1750 RPM @ 12 volts
• 13.5 amperage draw
• Built-in bypass valve
• Built-in thermal protection
• Built-in anti reverse check valve
• Built-in heat sink on back of motor
• Heavy duty dual EPDM pump seals
• Pressure adjustable from 100-300 PSI
• Can run dry up to 1 hour without damage
• 100% methanol compatible
• Tested prior to shipping
• Made in the USA
• Weight 5.2lbs

Flow & Horsepower Ratings @ 13.5 Volts:

• 1.4 gallons per minute open flow
• 115 liters per hour @ 190 PSI
• 30 gallons per hour @ 190 PSI
• 1890 cubic centimeters @ 190 PSI
• Supports up to 1700-2200 horsepower – 100% water mix
• Supports up to 1000-1300 horsepower – 50/50 water methanol mix
• Supports up to 800-1100 horsepower – 100% methanol mix

Special Notes:

• Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
• Use 12 gauge wire for power and ground
• Does not include pump fittings. Pump fittings are available for sale separately
• Pumps come preset at 220 PSI – Expect 4-5 years of service if pump pressure is left at 220 PSI or below
• Running the pump over 250 PSI is not advised and will shorten pumps life
• All tests were performed using a 6AN stainless steel braided hose on the inlet side of pump
• Using 1/4″ outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output
• Pump may be mounted vertical or horizontal

Applications:
Universal