Description
- Pressure adjustable from 100-300 PSI
- 3/8 NPT female inlet & outlet port
- Motor turns 1750 RPM @ 12 volts
- 13.5 amperage draw
- Built-in bypass valve
- Built-in thermal protection
- Built-in anti reverse check valve
- Built-in heat sink on back of motor
- Heavy duty dual EPDM pump seals
- Pressure adjustable from 100-300 PSI
- Can run dry up to 1 hour without damage
- 100% methanol compatible
- Tested prior to shipping
- Made in the USA
- Weight 5.2lbs
Flow & Horsepower Ratings @ 13.5 Volts:
- 1.4 gallons per minute open flow
- 115 liters per hour @ 190 PSI
- 30 gallons per hour @ 190 PSI
- 1890 cubic centimeters @ 190 PSI
- Supports up to 1700-2200 horsepower – 100% water mix
- Supports up to 1000-1300 horsepower – 50/50 water methanol mix
- Supports up to 800-1100 horsepower – 100% methanol mix
Special Notes:
- Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
- Use 12 gauge wire for power and ground
- Does not include pump fittings. Pump fittings are available for sale separately
- Pumps come preset at 220 PSI – Expect 4-5 years of service if pump pressure is left at 220 PSI or below
- Running the pump over 250 PSI is not advised and will shorten pumps life
- All tests were performed using a 6AN stainless steel braided hose on the inlet side of pump
- Using 1/4″ outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output
- Pump may be mounted vertical or horizontal
Applications:
Universal
Reviews
There are no reviews yet.