TI Automotive Fuel Pump – F90000274

$115.00

-

The F90000274 (aka the “high pressure Walbro 450, 465, or 485”) is one of our highest performing fuel pumps that we offer for in-tank applications. This pump is identical to the F90000267, but it has a higher pressure safety relief valve for use in high boost applications. We generally recommend this fuel pump over the F90000267 when the planned system pressure is intended to go over 80 psi (base + boost pressure).

Unassembled Delphi / Aptiv Metri Pack 280 series 2 pin female connector. Installer must have appropriate tools to assemble. Use on 12-14 AWG wire. Best practice is to use this connector (female terminals) on the power supply (non-load) side. Use outside fuel tank only.

Two different seal sizes available, depending on insulation thickness. Choose as indicated below:

SKU: F90000274 Category: Product ID: 5137

Description

  • Outlet diameter: 10mm (3/8″)
  • Diameter (upper body): 39mm
  • Diameter (lower body): 50mm
  • Length (inlet-outlet tips): 130.6mm
  • Fuse at 25A
  • Compatible with gasoline, race gas, and ethanol blends up to E99, as well as race gas/ethanol blends
  • Able to operate up to 112 psi total fuel pressure
  • Internal check-valve for use in staged (or non-staged) fuel systems
  • Dual channel turbine pump for very quiet operation
  • Comes with fuel safe sealed Delphi electrical connector
  • Requires Walbro prefilter on inlet (recommend Walbro 125-190)
  • Fuse each pump at 25A
  • Not recommended for methanol fuels
  • Made in USA by TI Automotive

Notes: When this pump is run at 18V, it is able to deliver over 40% more volume at 73 psi (compared to 13.5V) We recommend a 30A circuit be used if you wish to run this pump at 18V, and we recommend the higher voltage be applied intermittently. (i.e. only under high engine load). Carefully consider whether your fuel system is capable of supporting this pump before attempting to implement into a pre-existing fuel system that utilizes a smaller pump. Upgrades/changes may include electrical, filtration, fuel pressure regulation, and fuel line sizes.

**PLEASE CAREFULLY SELECT FUEL PUMPS BASED ON YOUR FUEL TYPE THAT YOU WILL BE RUNNING. NO RETURNS OR REFUNDS ON FUEL SYSTEMS, FUEL SYSTEM COMPONENTS, FUEL PUMPS OR ELECTRICAL COMPONENTS.

Fitment:

  • All Fore Innovations fuel pump modules (except compact version).
  • Some OE replacement applications (Requires upgraded wiring at a minimum) (Contact: parts@redlineraceparts.com for details).

Product Part Number: F90000274

Additional information

Weight 2.5 lbs
Dimensions 8 × 4 × 4 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.